Have you tried updating the firmware on your Netgear router but can’t get the job done? It is important to update the firmware on your router to get the best performance from it. But if you fail to update its firmware, then you might observe poor performance for your router. To rule out this possibility, let us help you update your router by eliminating any obstacle from the way. Once the obstacle is removed, you can update your router either by using the Netgear Nighthawk app or web interface. Let’s get started.
Let’s Fix Netgear Router Firmware Update Issues
Download the Right Firmware
When you are updating your router manually, you download the firmware file on your PC before installing it on the router. Different models of Netgear routers have different firmware files. Not all are same. So, you must make sure that the file that you have downloaded is meant for the router model that you have installed. If you download a file for any other router model by Netgear, then you will face issues while getting it installed. Check the file and ensure it is the correct one and then update your router using it.
Check Power Connection
A shaky and unstable power supply is one of the main causes why users get stuck in the firmware update process whether using the Nighthawk app or the web interface. So, make sure that the power plug and the power cord of the Netgear router are able to provide adequate power to it. You should also check the same with the modem. Besides, the device that you are using for firmware update process should also be sufficiently charged or powered up so that the process does not get interrupted in between.
Ensure Stable Internet Connection
If the internet connection is not stable then you will surely face trouble while getting your Netgear router upgraded. You must check the connection between the router and modem to verify the same. The cable that you have put to use to establish a connection between these two devices should be well in place and non damaged.
If you have connected the router to the modem wirelessly, then also you should make sure that they are connected properly. You can do so by checking the distance separating them. The router must be placed within the range of the modem.
Do Not Interrupt the Process
After you have downloaded the firmware file on your PC, you should try to update the firmware. But before you update your router, reboot it once. Power it down and unplug it. Let it be unplugged for some time. After about 5 to 10 minutes, plug in and turn it on.
Now, try to install the firmware file on the router. The PC must be connected to the router’s network. Use Netgear Nighthawk router login page and reach the admin dashboard. Install the firmware now. While the firmware is getting installed, make sure that you aren’t doing anything that can interrupt the process. Just stay on the same page and do not en new tabs or play games online. Let the process complete. The Netgear router will reboot itself once the firmware updates.
In the End
We are hoping that you have successfully updated your Netgear router with the help of solutions provided in this post. This brings an end to our helpful piece of writing. Make sure that you always keep an eye on the firmware updates for your router. Whenever there’s an update ready, get it installed keeping into consideration the tips given in this post. We suggest you bookmark this post for you may need to refer to it in the future while updating your Netgear WiFi router.
About Author
